Carflex 200
Exhaust gas hose for exhaust fumes/gases up to +200°C
Material
- clamp profile spiral: hot-dip galvanised steel band with additional plastic outer scuff-protection profile
- wall: neoprene-coated polyester fabric
Applications
- Suction of engine exhaust fumes up to max.+200 °C acc. to exhaust guidelines and sufficient fresh air intake (approx. 50%)
- All conventional exhaust systems, such as: - Exhaust Hose Reel - Suction Rail System - Upper/Lower Floor Systems - Stationary Systems
- Light to medium wear during extraction of petrol and diesel engine fumes from passenger vehicles
Properties
- good flow characteristics
- vibration-proof
- extremely compressible to approx. 1:5
- high tension-proof connection of wall-lining and spiral via special clamp mechanism
- highly flexible
- smallest bending radii
- extremely lightweight
Temperature Range
- +200°C with appropriate use of exhaust regulators and sufficient air supply (approx. 50% at the maximum given temperature)
Product Variations
DN |
vacuum |
bend radius |
outer Ø |
weight/m |
article no. |
production length |
max. production length |
|
bar |
mm |
mm |
kg |
|
m |
m |
63 |
0,23 |
38 |
76 |
0,55 |
000334:63:x |
2,5/5/7,5/10/12/15 |
25 |
75 |
0,18 |
46 |
89 |
0,6 |
000334:75:x |
2,5/5/7,5/10/12/15 |
25 |
80 |
0,15 |
48 |
93 |
0,63 |
000334:80:x |
2,5/5/7,5/10/12/15 |
25 |
100 |
0,1 |
60 |
117 |
0,79 |
000334:100:x |
2,5/5/7,5/10/12/15 |
25 |
125 |
0,06 |
75 |
142 |
0,95 |
000334:125:x |
2,5/5/7,5/10/12/15 |
25 |
150 |
0,04 |
90 |
167 |
1,47 |
000334:150:x |
2,5/5/7,5/10/12/15 |
25 |
200 |
0,03 |
120 |
217 |
1,76 |
000334:200:x |
2,5/5/7,5/10/12/15 |
25 |
|
Manufacturing and Delivery
- Customised production in the above-mentioned nominal widths and lengths
Available on request
- Available on request in other lengths, sizes, colours, spiral intervals, with stainless steel spirals.
Array
(
[active] => 1_2_1938_1939_4671_4687
)