Contact
Do you have general questions about the organisation, our locations or would you like to make a specific inquiry about Masterflex? Or are you looking for a special contact person for a specific department? We have some suggestions for you to choose from.
- General contact
Product configurator
Define parameters here and click button!
Product configurator
Define parameters here and click button!
Product information
Product data
Construction / Material
| Type of construction | axially extruded tubings without seams or welds |
| Execution of the wall | |
| Specifications of the wall | approved for direct food contact according to EU Directive 1935/2004, 10/2011 and its latest amending Directives, material complies with food regulations FDA 21 CFR § 177.2600 - 21 CFR § 178.2010 |
Properties
| Specifications of the product | manufactured with calibrated outer diameter |
| Chemical Properties | good resistance to chemicals, good resistance to solvents, good UV resistance, halogen-free, hydrolysis resistant, microbe-resistant, plasticiser-free, free from paint wetting impairment substances (LABS) |
| Physical Properties | low water absorption |
Operating Temperature
| Temperature Range | -30 to 70 °C |
Delivery Information
| Delivery, type of production | inner diameter: 1.0 - 41.0 mm, outer diameter: 2.0 - 42.6 mm |
Application Areas
| Areas of application | Agriculture, Automotive, Plant & Mechanical Engineering, Robotics & Automation, Industry, Aerospace technology, Bulk & Construction, Sea & Rail transport, Chemistry, Surface Technology, Plastics, Conveying‚ lifting & feeding technology, Textile, Printing & Paper, Vehicle Construction, Metal & Toolmaking |
Customizing Options
| optional item modification (on request) | other colours, rolls, cut-to-size sections |
Application areas
Supply variants
All data refer to a medium and ambient temperature of 23°C
* Smallest bending radius, related to the inside of the hose bend. | Operating pressure is given with a 3-fold safety factor and applies to the medium air, calculated values are marked with *.